Greetings & Welcome Back Everyone!
Today I want to continue EMP versus CME especially the difference types & their impact to both national grids & electronics (pcs, laptops, notebooks & cell phones/communication(s) etc.). Again it is simpler to quote from one very well researched & written article and give you the link, then comment on significant points.
Here is the link to article entitled "The Difference between EMP and CME" by Rob Hanus -
Here is the article:
The Difference Between EMP and CMEPosted on August 27, 2012 by Rob Hanus
(You can also listen to the podcast on EMP and EMP Protection.)Be sure to check out the videos I did that demonstrates shielding against a 50,000 watt AM signal, and the Surviving EMP Mini-Guide:
Join in on the discussion!
- See more at: http://www.thepreparednesspodcast.com/the-difference-between-emp-and-cme/#sthash.kvyoInYh.dpuf
Notice CME (Coronal Mass Ejections) affect the grid / national grids and only electrical or electronic devices plugged into grids at the time of CME impact.
In other words, only if your electronic or electrical device is actually plugged into the grid at the precise time of CME impact, would damage occur. This is a huge difference between impact damage of CME vs. EMP. CMEs can take out satellites - GPS / communications / national defense systems etc.
EMP(s) come in 3 stages, components or types depending on source be it man made (nuclear detonation) or natural (solar flares) namely E1, E2 and E3. As above article points out, E1 is the most destructive to computers and electronics / wiring, cable etc - as I pointed out in previous blog articles - it "attacks" electrons at an electron level as in atom level (electrons / protons / neutrons) . Shielding is possible and doable even at this level.
If common surge protectors are utilized, E2 pulses can still defeat them if surge is string eneough. There are better EMP shielding methods available.
E3 is the greatest threat; it is initiated via nuclear device detonation with "events" that can last minutes versus seconds. Notice - an E3 pulse literally has the ability to "fry" or burn out transformers, wires etc. In the case of the USA, vital grid components like transformers are no longer manufactured domestically, but overseas -likely China. This is why it would take years to restore the national grid especially if most of the world including China is wiped out by EMP events.
The world is now forced into codependency because of a common threat - EMP (and CME to satellites & national grids)! We are all in this together having a common "end of existence" (as we now experience) "foe." PPP EVs can be shielded against this and are both EMP & CME immune!
All three components - E1, E2 and E3 work via "induction" meaning electromagnetic fields (wave forms) "induce" or by the action of passing through electronics / electrical devices, electromagnetically affect / destroy what they come in "contact" with. Those of you readers familiar with electromagnets know that when solid magnetic bar passes through a copper (wire) coil, it induces electricity via field interaction - magnetic field 'contacting"/ interacting with electrons in wire thus "induction."
In my next post, I will examine shielding methods as touched on above.
Again PPP EVs Portable Power Plant Electric Vehicles shield at point of manufacture offer the sole, viable solution let alone sustainable clean energy & grid supply along with instant "retirement" complete with disposable income.
RenewedAmericanSpirit ~ Catch It Then Pass It On